Product Details
FNIRSI DSO-TC3 - mini 3-in-1 oscilloscope, signal generator & transistor tester
FNIRSI DSO-TC3: handheld oscilloscope signal generator, & transistor tester in one. 2.4" colour TFT display, 1500 mAh Li-ion battery. Sampling rate 10 MS/s, analogue bandwidth 500 kHz, extra accessory adapters and P6100 probe.
-
Oscilloscope Mode DSO-TC2 DSO-TC3 Real-time sample rate 2.5 MS/s 10 MS/s Analog bandwidth 0 ~ 200 kHz 0 ~ 500 kHz Input resistance 1 MΩ Coupling AC/DC Test voltage range 1:1 probe: 80 Vpp (±40 V) 10:1 probe: 800 Vpp (±400 V) Vertical sensitivity 10 mV/Div ~ 10 V/Div Vertical displacement adjustable, with indication Horizontal time base range 1us-10s Trigger mode Automatic, Regular and Single Trigger type Rising edge, falling edge Trigger level Adjustable, with indication Waveform freeze Yes (HOLD function) Automatic measurement Maximum, minimum, average, rms, peak-to-peak, frequency, period, duty cycle Transistor Detector DSO-TC2 DSO-TC3 Category Scope Technical Parameter Triode β is greater than 10 and less than 600 Magnification hfe, base-emitter voltage Ube, Ic/Ie, collector-emitter reverse cut-off current Iceo, Ices, protection diode forward voltage drop Uf ① Diode Forward voltage drop <5 V Forward voltage drop <4.5 V Forward Voltage Drop, Junction Capacitance, Reverse Leakage Current ② Zener diode 0.01 V ~ 4.5 V 0.01 V ~ 4.5 V (1-2-3 test area) forward voltage drop, reverse breakdown voltage 0.01 V ~ 24 V 0.01 V ~ 32 V (K-A-A test area) reverse breakdown voltage FET ③ JFET Gate capacitance Cg, drain current Id at Vgs, protection diode forward voltage drop Uf ④ IGBT Drain current Id at Vgs, protection diode forward voltage drop Uf ④ MOSFET Turn-on voltage Vt, gate capacitance Cg, drain-source resistance Rds, protection diode forward voltage drop Uf ④ SCRS Turn-on voltage <5 V, gate trigger current <6 mA Gate voltage Triac Capacitance 25 pF ~ 100 mF Capacitance value, loss factor Vloss ⑤ Resistance 0.01 Ω ~ 50 MΩ Resistance Inductance 10 µH ~ 1000 µH Inductance value, DC resistance ⑥ Battery 0.1 V ~ 4.5 V Voltage value, positive and negative polarity Input voltage 0 ~ 16 V 0 ~ 40 V Voltage value Temperature (DS18B20) √ Temperature Humidity (DHT11) √ Humidity PWM output √ Infrared remote control decoding NEC protocol infrared code Display user code and data code, and display the corresponding infrared waveform Signal Generator DSO-TC2 DSO-TC3 Sine wave x 1-100KHz/0-3.3V/50% Square wave x 1-100KHz/3.3V/50% Pulse wave x 1-100KHz/3.3V/0-100% Triangle wave x 1-100KHz/0-3.3V/50% Ramp x 1-100KHz/0-3.3V/0-100% DC x 0-3.3V General Specifications Display 2.4 inch TFT color screen, LED backlight Powered by 1500 mAh rechargeable lithium battery Charging USB Type-C, +5V Dimensions 79 mm × 31 mm × 103 mm Weight 297 g Note ①: Ices, Iceo, Uf are displayed only when valid Note ②: Junction capacitance and reverse leakage current are displayed only when valid Note ③: The turn-on or turn-off voltage of the FET must be less than 5V Note ④: Displayed only when there is a protection diode Note ⑤: Vloss is only displayed when valid Note ⑥: Two-pin component and inductance measurement when the resistance is less than 2.1 kΩ Packing list:
- DSO-TC3 Tester
- Adapters
- P6100 High Voltage Probe
- Type-C cable
- Test probe (3)
- Regular Probe
- English Manual
- Package weight: 350 g (with adapter)
- Package size: 140x125x60 mm
pictures later
- DSO-TC3 Tester
-
manufacturer FNIRSIgarantie 1 yearStock In stockArticle No. fni-dsotc3Weight 350 g/pcs
