Change language
MagyarEnglish
Change currency
Most popular products
Partners
Newsletter
Payment solution
Product Details


Hantek 2D42 - oscilloscope, DDS generator & multimeter: 2CH + 1CH, 40 MHz, 250 Msa/s

NEW
Stock: In stock
Hantek 2D42 - oscilloscope, DDS generator & multimeter: 2CH + 1CH, 40 MHz, 250 Msa/s
  • Hantek 2D42 - oscilloscope, DDS generator & multimeter: 2CH + 1CH, 40 MHz, 250 Msa/s
89 000 Ft , (70 079 Ft+VAT)
shipping fee 
:
Favourable delivery charges.
postage > 
:
Domestic- 24h; international- 24-72h
    • Automatic frequency and amplitude measurement, self-calibration function.
    • Type C power + data transfer interface, can share the charger and data cable with your mobile phone; AUTO one-key test.
    • Oscilloscope + Waveform Generator + Multimeter: This multi-purpose station own three universal test instrument functions. It is outgoing right-hand product for engineers.
    • Waveform generator output function: output sine, square, triangle, trapezoidal and other waveforms; sine up to 25 MHz.
    •  

      Specifications
       Model Hantek2D72 Hantek2D42 Hantek2C72 Hantek2C42
        2CH+DMM+AWG 2CH+DMM+AWG 2CH+DMM 2CH+DMM
      Oscilloscope Mode
       Bandwidth 70 MHz 40 MHz 70 MHz 40 MHz
      Horizontal
       Sample Rate Range 250 MSa/s(Single-channel), 125MSa/s(Dual-channel)
       Waveform Interpolation (sin x)/x
       Record Length Max. 6K for single-channel; 3K samples per dual-channel
       SEC/DIV Range 5ns/div~500s/div  1, 2, 5 sequence
      Vertical
       A/D Converter 8-bit resolution,each channel sampled simultaneously
       VOLTS/DIV Range 10mV/div~10V/divat input BNC
       Bandwidth Limit, typical 20 MHz
       Low Frequency Response (-3db) ≤10 Hz at BNC
       Rise Time at BNC, typical ≤5 ns
       DC Gain Accuracy ±3% for Normal or Average acquisition mode, 10V/div to 10mV/div
      Note: Bandwidth reduced to 6 MHz when using a 1X probe.
      Acquisition
       Acquisition Modes Normal
      Trigger
       Type Edge
       Mode Auto, Normal, single
       Level ±4 divisions from center of screen
      Trigger Level Accuracy 0.2div × volts/div within ±4 divisions from center of screen   
       Slope Rising, Falling, Rising & Falling
       Source CH1/CH2
      Input
       Coupling DC, AC or GND
       Input Impedance, DC coupled 25pF±3 pF, 1MΩ±2%
       Probe Attenuation 1X, 10X
       Supported Probe Attenuation Factors 1X, 10X, 100X, 1000X
       Maximum Input Voltage 150VRMS
      Measurement
       Cursor Voltage difference between cursors: △V
      Time difference between cursors: △T
       Automatic Measurements Frequency, Amplitude
      Arbitrary Waveform Generator Mode
       Waveform Frequency Sine: 1Hz~25MHz x x
      Square: 1Hz~10MHz x x
      Ramp: 1Hz~1MHz x x
      EXP: 1Hz~5MHz x x
       Sampling 250MSa/s x x
       Amplitude 2.5Vpp(50Ω) x x
      5Vpp(High impedance) x x
       Frequency Resolution 0.10% x x
       Channel 1CH waveform output x x
       Waveform Depth 512Sa x x
       Vertical Resolution 12 bit x x
       Output Impedance 50 Ω x x
      DMM
       Maximum Resolution 4000 Counts
       DMM Testing Modes Voltage, Current, Resistance, Capacitance, Diode & On-Off
       Maximum Input Voltage AC: 600 V; DC: 600 V
       Maximum Input Current AC: 10 A; DC: 10 A
       Input Impedance 10 MΩ
       Measurement Term Range Accuracy Resolution
       DC Voltage 400.00 mV ± (0.8% + 5) 100 uV
      4.000 V 1 mV
      40.00 V 10 mV
      400.0 V 100 mV
      600.0 V ± (1% + 2) 1 V
      Overload protection: 400mV: 250V, other: 600Vrms.
       AC Voltage 4.000 V ± (1.2% + 5) 1 mV
      40.00 V 10 mV
      400.0 V 100 mV
      600.0 V ±(1.5% + 5) 1 V
      Frequency: 40Hz~400Hz;
      Frequency of 400V and 600V: 40Hz~100Hz
       DC Current 40.00 mA ± (1% + 2) 10 uA
      400.0 mA ± (1.5% + 2) 100 uA
      4.000 A ± (1.8% + 2) 1 mA
      10.00 A ± (3% + 2) 10 mA
      Overload protection: 
      self restoring fuse: 200mA/250V, 4A and 10A range no fuse.
       AC Current 40.00 mA ± (1.3% + 2) 10 uA
      400.0 mA ± (1.8% + 2) 100 uA
      4.000 A ± (2% + 3) 1 mA
      10.0 0A ± (3% + 5) 10 mA
      Frequency: 40Hz~400Hz;
      self restoring fuse: 200mA/250V, 4A and 10A range no fuse.
       Resistance 400.0 Ω ±(1% + 3) 0.1 Ω
      4.000 KΩ ±(1.2% + 5) 1 Ω
      60.00 KΩ 10 Ω
      400.0 KΩ 100 Ω
      4.000 MΩ 1 KΩ
      40.00 MΩ ± (1.5%±3) 10 KΩ
      Overload protection: 220Vrms
       Capacitance 40.00 nF ±(3% + 5) 10 pF
      400.0 nF 100 pF
      4.000 uF 1 nF
      40.00 uF 10 nF
      100.0 uF 10 0nF
      Overload protection: 220Vrms
       Diode 0V~1.0 V
       On-Off <50 Ω
      General Specifications
      Display
       Display Type 2.8 inch 64K color TFT
       Display Resolution 320x240
       Display Contrast Adjustable
      Power Supply
       Supply Voltage 100V-240V AC, 50Hz-60Hz; DC INPUT: 5V DC, 2A
       Power Consumption <2.5 W
       Fuse T, 3 A
       Battery 2600 mAh * 2
      Environmental
       Operating Temperature 0~50 °C (32~122 °F)
       Storage Temperature -40~+71°C (-40~159,8 °F)
       Humidity ≤+40°C: ≤90% RH
      +41°C ~50°C: ≤60% RH
       Cooling Method Convection
       Altitude Operating and 3,000 m (10,000 feet)
       Mechanical Shock Random Vibration 0.31 gRMS from 50Hz to 500Hz, 10 minutes on each axis
      Nonoperating 2.46 gRMS from 5Hz to 500Hz, 10 minutes on each axis
      Operating 50 g, 11 ms, half sine
       Mechanical
       Dimension 199x98x40 mm
       Weight 624 g
       Standard Accessories Probe*1,Clip Probe*2, Type Charging Cable*1, Power Adapter*1, Multimeter Probe*1 Probe*1,Clip Probe*2, Type Charging Cable*1, Power Adapter*1, Multimeter Probe*1 Probe*1,Clip Probe*1, Type Charging Cable*1, Power Adapter*1,  Multimeter Probe*1 Probe*1,Clip Probe*1, Type Charging Cable*1, Power Adapter*1, Multimeter Probe*1

       

      https://www.vovov.hu/shop_ordered/36246/pic/meromuszer/oszcilloszkop/hantek-2xxx_meall.webp

    WebShop System